Profile problem

afx · Post by **afx** » November 19th, 2011, 2:51 am

Hi,
I am trying to use a profile from Museo for their Artist Cards on an Epson R3000.
http://www.museofineart.com/files/2613/ ... NR3000.zip
The softproof matches the print, but it is all monochrome blue which is not intended.

Other Museo papers work just fine. Any ideas what is wrong?

cheers
afx

alain · Post by **alain** » November 19th, 2011, 8:38 am

Hi

Maybe it's a icc4 profile instead of a icc2 profile.

Alain

jsachs · Post by **jsachs** » November 19th, 2011, 8:40 am

If the softproof matches the print, then it sounds like there may be something wrong with the profile. I notice the profile is more than 3MB which is quite large. Are the other similar profiles you have of comparable size?

afx · Post by **afx** » November 19th, 2011, 10:04 am

Yes, it is an ICC4 profile as far as I can tell and it is also the only monster of this size....

cheers
afx

alain · Post by **alain** » November 20th, 2011, 5:54 am

try to get a icc2 profile. As far as I know and have seen pwp doesn't support icc4 profiles. (Like a lot of other programs.)

Digital Light & Color

Profile problem

Profile problem

Re: Profile problem

Re: Profile problem

Re: Profile problem

Re: Profile problem