Page 1 of 1
zoom to fit and zoom to 1:1
Posted: October 13th, 2023, 9:39 pm
by pierrelabreche
When using the level transformation, zoom to fit and zoom to 1:1 buttons on the left ( input ) image are effective on the right image ( output ).
Re: zoom to fit and zoom to 1:1
Posted: October 14th, 2023, 8:03 am
by jsachs
There is no synchronized zooming/scrolling for any transformation for which the output image can be a different size from the input image.
Re: zoom to fit and zoom to 1:1
Posted: October 14th, 2023, 10:53 am
by pierrelabreche
Zooming used to work very well in previous versions.
In input/output image display, with the input image displayed in the left side of the image display area, the zoom to 1:1 button above the input image has no effect on the input image, but the output image is zoomed in.
I also experienced an abnormal termination when trying to reproduce the problem.
It is essential for the level transformation to allow zooming to 1:1 on the input image to adjust precisely the control points of the straight level line.
I also noticed that the output image zoom to 1:1 button is really a toggle between zoom to 1:1 and another zooming level.
Re: zoom to fit and zoom to 1:1
Posted: October 14th, 2023, 4:45 pm
by jsachs
Sorry, I misread your original message. Fixed for next release.