Framed image does not clone
Posted: March 19th, 2019, 11:09 am
1. open an image
2. run it through some common transformation (Brightnes, Sharpen...etc) - important step
3. Frame the output using an image in the Frame tab
4. Clone side image from from the step 2 -> the Frame step will not finish, see the attachment
If the step 2 is skipped, the Frame clone completes.
2. run it through some common transformation (Brightnes, Sharpen...etc) - important step
3. Frame the output using an image in the Frame tab
4. Clone side image from from the step 2 -> the Frame step will not finish, see the attachment
If the step 2 is skipped, the Frame clone completes.