Unsharp Mask Help page
Posted: May 8th, 2021, 6:56 pm
In looking at the Unsharp Mask help page I notice:
a) There is no description of the 'Sharpen Factor' setting
b) The document mentions a Threshold setting of 100%, bit the slider only seems to go to 50%.
It's also a bit counter intuitive that 50% is all the way to the left, and 0%it all the way to the
right. I normally expect things to get higher as you slide to the right.
Thanks!
John P
a) There is no description of the 'Sharpen Factor' setting
b) The document mentions a Threshold setting of 100%, bit the slider only seems to go to 50%.
It's also a bit counter intuitive that 50% is all the way to the left, and 0%it all the way to the
right. I normally expect things to get higher as you slide to the right.
Thanks!
John P