Page 2 of 2
Re: Clone/Paint softness profile
Posted: January 26th, 2012, 12:41 pm
by alain
jsachs wrote:Yes, that has been fixed as well - at least for add and subtract modes.
thanks.
Re: Clone/Paint softness profile
Posted: January 27th, 2012, 9:39 am
by den
When the brush updates become available, particularly in regard to the
Mask Tool-Paint Brush and you have an 'artistic' approach to retouching... ...you might try re-visiting:
"Painting with SoftLight": http://www.dl-c.com/discus/messages/2/1 ... 1207209217...
...without the fixed transparencies suggested in Step 3; using instead, accumulating Add or Subtract brush 'strokes' [left click-hold-drag-release] and/or 'stamps' [left click-slight shift-left click-slight shift-...repeats].
Re: Clone/Paint softness profile
Posted: January 30th, 2012, 5:51 am
by HanSch
""Build up" for the mask paintbrush is certainly a nice addition. But I hope the old mode is still available as well, as there are occasions where the build up mode is less desirable.
Re: Clone/Paint softness profile
Posted: January 30th, 2012, 9:06 am
by den
HanSch wrote:""Build up" for the mask paintbrush is certainly a nice addition. But I hope the old mode is still available as well, as there are occasions where the build up mode is less desirable.
I concur ...and... perhaps when the mask paintbrush is in 'accumulating mode', it will have a 'control-z' multiple Undo as well.